Training Advanced Electrical Motor

701bigstock Pressure transmitter in oil an 71934271.jpg - Training Advanced Electrical Motor

Training Advanced Electrical Motor – This training is designed to give knowledge and skill on operation, maintenance, protection, control, troubleshooting and Failure of electric motor that many used in industries. Electrical motors are the “workhorses” of industry and are the most widely used electrical machines. Applications of electrical motor can be found in industries, electric transportation, robotics, process control and energy conservation. This course gives a thorough understanding of electrical motor’s working, control , protection, maintenance, failure modes and the tools to maintain and troubleshoot electrical motors. This course also covers electrical motor starting and speed control .

Reliability-based maintenance (RBM) and condition-based maintenance (CBM) strategies are now widely used by industry, and health monitoring of electrical motor and drives. Motor current signature analysis (MCSA) use to diagnose faults in induction motor drives. MCSA is a noninvasive, online monitoring technique for the diagnosis of problems in induction motors. Participant will gain a fundamental understanding of the electrical motor, installation, operation, maintenance, failure and troubleshooting. Participant will gain valuable insight into the selection of the protection necessary to ensure motors are protected against fault conditions, so as to ensure reliability and long life. Computer simulations are used for understanding of electrical motor operation, maintenance, failure and troubleshooting.

Training Advanced Electrical Motor

Course Outcomes Training Advanced Electrical Motor

After successfully completing this course, Participants will able to do the following:

  • Understand the electrical motor basic principles
  • Understand the operation, maintenance, protection, control, troubleshooting and Failure of electrical motor
  • Describe the failure analysis of electrical motor and the solutions.
  • Understand the Troubleshooting of failure of electrical motor.

 Course Outline Training Advanced Electrical Motor

  • Introduction to electrical motor (Fundamental Concepts, AC and DC Motor).
  • Types Of Electric Motors ( Induction Motors, Synchronized Motor, Shunt, Series and Compound Reinforcement)
  • Electrical motor operating system and starting control
  • Electrical motor: speed control.
  • Protection of Electric Motor During Starting, Running and Braking
  • Maintenance of Electric Motor
  • Energy efficiency of electrical motor.
  • Power Quality issue: Harmonic elimination
  • Troubleshoot of electrical motor
  • Failure Analysis And Repair of electrical motor.
  • Condition monitoring for electrical motor systems
  • Causes and effects of: broken rotor bars, abnormal airgap eccentricity, shorted turns in stator windings,
  • shaft/coupling misalignment, stator core vibration characteristics and problems
  • Interrelationships between current and vibration monitoring to detect the root cause analysis (RCA) of problems
  • Fundamentals on current signature analysis of motor to detect electrical motor problems.
  • Prediction of fault severity: reliability and limitations
  • Case histories from a range of industries
  • Diagnosis of mechanical problems of electrical motor
  • Computer simulations are used for electrical motor operation, maintenance, failure and troubleshooting.

Course Methode Training Advanced Electrical Motor

Presentation
Simulation
Animation
Video
Software support
Discuses
Case study

Fasilitas Training
  • Lokasi Training di Hotel Bintang 3-5
  • Sertifikat Training
  • Modul Materi (Hard Copy & Soft Copy)
  • Flashdisk
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • Souvenir Eksklusif
  • 1x Makan Siang dan 2x Coffee Break (Jam 10:00 & 14:00)
  • Penjemputan Bandara – Hotel (Pulang-Pergi selama pelatihan)
Biaya dan Lokasi Training
  • Yogyakarta : Rp 6.800.000,- / Peserta
  • Bandung : Rp 7.600.000,- / Peserta
  • Jakarta : Rp 7.800.000,- / Peserta
  • Surabaya : Rp 7.800.000,- / Peserta
  • Malang : Rp 7.800.000,- / Peserta
  • Semarang : Rp 7.200.000,- / Peserta
  • Solo : Rp 7.500.000,- / Peserta
  • Bali : Rp 7.000.000,- / Peserta (Minimal 2 peserta)
  • Lombok: Rp 7.400.000,- / Peserta (Minimal 2 peserta)
Keterangan
  • Biaya diatas jika 1 perusahaan hanya mengirimkan 1 peserta.
  • Jumlah peserta memperngaruhi biaya diatas, jadi jika 1 perusahaan mengirimkan 2 atau lebih peserta maka biayanya dapat dibawah (turun) dari biaya yang tertera diatas.
  • Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  • Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  • Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan ini, silakan isi form di Formulir Pendaftaran.

 

output k4bSCJ - Training Advanced Electrical Motor

Formulir Pendaftaran

Contoh ; 29-30 Desember 2020

Jadwal Training Terbaru di Jogja, Bandung, Jakarta, Bali, Surabaya, Lombok. Lihat Jadwal Fix Running dan Dapatkan penawaran harga murah & diskon dari Kami. Jadwal Pelatihan  Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember Fix Running

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *